Questions? Comments? Send me an email at TaraGettingMarried@gmail.com.
Showing posts with label How-To. Show all posts
Showing posts with label How-To. Show all posts

Wednesday, September 14, 2011

Favors: Part 2!

I mentioned before that I wanted to do something extra on top of the vanilla extract. Well, Sunday night, I had very little to work with and I still wanted to make it happen.  So, this is what I came up with.  




So, blogger is being a pain in my butt tonight and shifting some of my pictures.  I don't feel like spending the time to try to get it to fix them, so just turn your head to the side.  ;)  

I made homemade vanilla sugar.  I bought burlap bags from Uline at the same time that I bought the giant roll of burlap.  I also bought small plastic bags.  I wasn't sure what I was going to use them for, but I knew I wanted them!

I put a bunch of sugar and some vanilla beans in my food processor and blended it until it was all mixed up and the vanilla was just flecks in the sugar.  Then I filled the plastic bags with it.  Then I put that bag inside the burlap bag and cinched up the strings.  

For the labels, I printed out "Homemade Vanilla Sugar" a bunch of times in 1.25" x 1.25" squares.  Then, I used my square hole punch to cut each square out.  Next, I punched a hole in the corner of the square using just a regular old hole punch I had laying around.  
 
Then I cut out small strips of navy blue ribbon and tied it around the string on the burlap bag and ran it through the hole in the cardstock.  I just did a single knot.  It held tightly.
 
Again, easy peasy.  :)  I think they're adorable and I love them.  The vanilla extract is going to be on a table right as the guests enter the tent.  Then, the vanilla sugar will be at each place setting.  I'm thinking about printing up recipes that use vanilla extract and vanilla sugar to set out at the wedding.  I guess we'll see if I have time before this wedding sneaks up on me!

Vanilla Favors: Finished!

The vanilla favors were one of the projects I finished up on Sunday.  I'm so happy with how they turned out.  Please excuse the crappy photos.  I was hot, tired, sweaty, and running around like crazy so I'm lucky I took the 10 seconds to get a few crappy photos before stuffing them in the back seat of Philip's Pilot!






I need to snip off the excess string but I ran out of time Sunday night.  But, that should take 5 minutes tops when we arrive in Pennsylvania.  :)  

I printed out "Homemade Vanilla Extract" a bunch of times in 1.25" x 1.25" squares.  Then, I used my square hole punch to cut each square out.  Next, I punched a hole in the corner of the square using just a regular old hole punch I had laying around.  

Then, I took some twine I got from Dollar Tree and wrapped it around the neck of the bottle three times.  When I came around the fourth time, I ran one end through the hole in the square cardstock.  Next, I just tied a double knot.  

That's it.  Easy peasy.  :)

Wednesday, August 10, 2011

How To: Mr. & Mrs. Chair Signs

A while back, I made Mr. & Mrs. signs for the chairs at the reception.  I promised you all a tutorial, so here it is.

First, pick up your supplies.  I bought all of mine from Michaels (you can always find coupons for that place!).  You will need the following:
  • Light colored acrylic paint (I used Ivory)
  • Dark colored acrylic paint (I used Gold)
  • Crackle medium
  • Paint brushes
  • Twine, ribbon, or string of some sort (for the handle)
  • A wooden plaque
  • A drill (optional -- easiest way to attach the string)
  • Pen and pencil
  • Template/stencil




Once you've got your supplies together, it's time to start painting.  First, put on a coat of the dark colored paint.  Make sure the paint coats the wood evenly.  It will probably take more than one coat of paint.



Once the dark paint dries, put on a coat of the crackle medium.  Let that dry and then put on a coat of the light colored paint.  


The paint will begin to crackle almost immediately.  Allow the paint to dry completely (at least a few hours), and then you can begin the process of putting the words on the signs.  

I made my "stencils" on Microsoft Word.  I chose Edwardian Script.  I printed the words "Mr." and "Mrs." in a large font and then cut them into rectangles so that they would fit over the plaques.  

I used a pencil to shade in the backside of the paper making sure to cover the entire surface (at least the places where there is writing on the front).  


Then tape the stencils to the plaques.  Then use your pen to trace the letters.  Press hard so that it will leave the outline (from the pencil shading) on the plaques.  


Remove the paper and you should have an outline like this one:


Now you can fill it in with paint.  I was going to use the gold paint that I used as a base, but I wanted it to be darker.  So, I added some black paint to it and then filled in the outline.  



Allow the paint to dry before moving on to the next step (you don't want to smudge the paint and have to attempt to fix it!).  [Side note: the crackle medium recommends sealing the paint with a varnish.  I didn't do it because I was afraid that the paint would smear.  And, I am not using them where they will be exposed to the weather, so I thought they would be okay.  You should decide what you think will be best for your signs.]  

Once the paint is completely dry, you can drill the holes for the ribbon/twine/string (you can use whatever you'd like -- it's to hang the signs from the chair).  You don't necessarily have to drill the holes.  You could find some other way to attach the string.  I just thought it was the easiest way for me.


I drilled a hole on each side of the top of the plaques (in the corners).  I was just going to feed the twine through the holes, but it looked too thin.  So, I took three pieces of twine and braided them together.  Then I took the braided strand and fed it through the holes.  I tied a knot in both ends of the strand to hold it in place (the knots are on the back of the plaques so they cannot be seen).  


Voila!  Now you've got two beautiful signs for your chairs at the wedding.  I'm super pleased with them.



I've also seen these done with "bride" and "groom" or even the names of the bride and groom.  I liked the idea of Mr. and Mrs. because it's the whole point of the wedding, right?  However, I still wanted to be able to use them after the wedding, so I didn't want to use bride and groom.  Philip and I have his and hers closets, so I'm going to use them on the closet doors as decoration after the wedding.  :)


So, what do you think?!

Wednesday, July 27, 2011

My favorite part of the invitations...

The invitations are almost complete.  I keep having little issues which are delaying the process.  However, they should be finished tonight!  And, if not, I'm throwing them in the trash and just calling everyone.  lol   -- kidding!

Anyway, last night, I got to work on something for the invitations that was actually fun.  That is really unusual lately!  I'm talking about embossing!

Yesterday after work, I picked up a heat gun thing to do the embossing.  I thought it would be tricky or boring or some other terrible thing.  I was wrong!  It's so cool!  I love embossing.  I wish I would have included more of it for our invitations!  

First, you get your envelope ready.  And, by ready, I mean stick it on a flat surface (ha!).


Next, stamp the flap on the envelope.  I used the stamp I created for our return address.  The ink I used was Ranger Tim Holtz Distress Embossing Ink in Clear For Embossing.  


Next, pour embossing powder over the stamped envelope and then lightly tap it off so that the powder is only covering the ink.  I used Zing! Embossing Powder in Gold (I wanted to make sure that it would show up on the dark blue envelopes!).  



Next, use an embossing heat tool to raise the image.  I used a Uchida Embossing Heat Tool.  I got it from Michael's with a 40% off coupon.  It ended up being about $15.  


In that photo, you can see that the bottom powder is already "melting" and starting to raise up.  It's pretty much the coolest thing ever to watch.  ;)  When it's finished, it looks like this:



The entire stamp is raised up off the paper.  And, it looks shiny and beautiful.  :)  Please excuse all of the blacked out middles on the stamp; I can't take any chances on getting stalkers!  I'm already under enough stress!

The process is super easy and takes only about a minute.  And it's just so cool to watch the powder melt!  If you haven't ever embossed anything, give it a whirl!  It helped me ease some stress from this crazy invitation making endeavor!  

Sunday, March 6, 2011

How To: Painted Canvas Bags

I am pleased to say that take 2 on the canvas bags went very well.  I did mine a little differently than my inspiration photo, but I like the way they turned out: 


I bought some doilies from Dollar Tree.  They came in a pack of 32 for a dollar (of course!).  I bought the 8" size.  I wanted them to be just big enough for a letter stencil in the center.  


First, I printed the letters out that I needed.  I decided to do six bags: one for each of the mothers, both bridesmaids, and the flower girl (T, K, C, T, A, B).


Next, I cut out the letters.  It was incredibly tedious.  Just FYI, I no longer like the letters A or B.  K is cutting it close.  T and C are still on my good list though!  Oh, I used the font Monotype Corsiva.  

Once I got all of the letters cut out, I used a glue stick to attach the letters to the doilies.  


Once all of the letters were attached, I used a pen to trace them.  


Once the letters were traced onto the doilies, I had a nice pattern to use!

Next, I used my Xacto knive to cut the letters out of the doilies.  


 Once I had the letters cut out of the doilies, I used a little bit of glue from the glue stick to get the doilies to stick to the canvas bags.  Then I used a sponge brush to paint over the doily patterns.  


Right after I finished painting, I used a hair dryer to dry the paint slightly.  I didn't want to dry it completely; just enough to make sure it wouldn't smudge as I pulled off the doily (if it dries completely, the doily will be harder to take off -- the paint will act as a glue!).  Then, I pulled the doily off the bag.  

I was left with a beautiful pattern on my bags.  I tried to move the doily around for each bag.  I didn't want them all to be the same. 

In the inspiration photo I had, the doily wasn't completely painted over.  However, I thought it would be neat to do the entire doily, but on the edge of the bag.  That way, when something is put in the bags, the pattern will wrap around the bag.  I guess we will see how it looks once I actually order the gifts to put in the bags! 

Oh, and I plan to put some ribbon around the handles of the bag, similar to the bags in the Seaside Smitten blog.  I really liked that added touch!  

So, what do you think?

Friday, February 25, 2011

How To: Envelope Liners

As I said in the previous post, these envelope liners are really simple.  They are just a little time consuming.  

First, find the paper that you'd like to use as a liner.  You could really use any kind of paper, but you should probably stick with something light (not cardstock) because the liner needs to be folded.  Also, cardstock probably wouldn't stay glued as easily when it is folded over (harder to keep the envelope closed).  I recommend going with wrapping paper.  It's light and it comes in lots of different colors and designs (so you can easily find something that works for you!).

I stopped by Dollar Tree last weekend and found some tissue paper that I liked.  It was foil lined so it was a little heavier than normal tissue paper.  It was just like normal wrapping paper.

Next up, figure out which envelopes you're going to use.  I went with these.  They are light, but they do the job.  They were also the perfect size for my STDs.

Once you've got your envelopes and your paper for the liners figured out, measure your envelopes.  


Measure from the bottom of the envelope to the point where the adhesive starts (in the center of the envelope).  Then measure your envelope from one side to the other.  Once you have those measurements, cut a piece of cardstock to that size (I just used a scrap piece of cardstock).  

Once you have your cardstock cut out, insert it into the envelope so that the tip of the envelope is at the top of the cardstock.  Then trace the lines for the point of the flap.  Then cut the point out of the cardstock.  

Now you've got your pattern!  Once that is all finished you're ready to cut out your liners.  I didn't do any tracing after I made the pattern.  I just lined up my pattern with the paper and used my Xacto knife to cut out the patterns.  


When the cutting was finished, I had this final product:


Once I had the pattern cut out, I inserted it into an envelope.  Make sure the liner goes in evenly and centered.  Try not to crinkle the paper.  

 

When the liner is in the envelope, crease the paper where the envelope folds over.  Then fold the liner over and place some adhesive on the flap of the envelope (I used these).  


Then fold the flap over onto the liner (making sure the liner is flat!) and make sure the liner sticks to the flap.  You should end up with something like this:



I am pleased with how mine turned out.  They aren't all perfect, but it did add a nice touch to the plain envelopes.  :)  And they looked terrific with my Save-the-Dates:


So, what do you think?  Have you done envelope liners for your invitations or Save-the-Dates?

Sunday, February 20, 2011

How To: Save-the-Date Magnets

These DIY magnets are really simple.  They took some time, but I think they were entirely worth it.

First, figure out the design of your Save-the-Date cards.  As you might remember, It took several tries before we got the perfect one (here, here, here, and here).  I made all of my designs in Microsoft Publisher.  It's really easy to work with.  I used photos from our engagement photo session. 

Before you start designing the card, you need to figure out how big you want the magnet to be.  I chose to go with a 3.5x5 inch size, so I input the size in my Publisher design before getting started.  If you design in a size that you're not going to order, then when you order the prints, the photo will have to stretch or shrink or possibly even get cropped... and that's not a good thing!

Once you have a design you like, order them.  You can order photo prints like I did or you could order postcards from someplace like Vistaprint.  Either way, look for deals!  I got my prints for $0.10 per photo with free shipping from PhotoWorks.  I am on VistaPrint's email list and they constantly send me deals.  I've seen deals for 100 postcards for FREE (plus shipping)!  You can't really beat that!  It's just going to depend on how big you want your magnets to be. 

If you're really on a budget, you can do the 250 free business cards from Vistaprint and buy business card magnets.  I just wanted mine to be bigger because I wanted our photos on them.  It's really up to you!

Anyway, on to what I did with my magnets.  As I said, they were really simple.  However, I wouldn't recommend doing them unless you have a guillotine paper cutter.  I'm sure these would become really tedious if someone did them using regular scissors (your hands would hurt for days!).  And, I don't think that a paper cutter with the sliding blade would be able to cut deep enough into the magnet. 

I have a giant guillotine paper cutter.  Most people wouldn't really have much use for one as large as mine.  I got it when I was doing my pocketfold invitations because I needed something big enough to cut my enormous sheets of paper.  I did a bunch of research and got mine used off of Craigslist for $30.  Super deal!  Of course, I had Philip pick it up for me (I don't willingly go into strangers' homes!).  Again, look for those deals!

Anyway, back to the magnets.  I suggest buying 8.5x11 sheets of adhesive magnets.  I bought mine from Oriental Trading.  They come 12 to a pack for $9.99.  I knew I would be able to get 5 magnets with my 3.5x5 inch size off of one sheet.  I need to have about 70 magnets, so I ordered 2 packs.  They only took a few days to arrive. 

Once they were here, I started my cutting:


I didn't measure anything out.  I lined up the magnet sheet with the ruler on my cutter and just cut, cut, cut!  It didn't really take that long to do the cutting, even though I had 14 sheets to cut.  I was pleased to have all 70 magnets in a nice, neat, little pile:


Then began the sticking.  I peeled the paper backer off of the magnet and lined the photo up with the lines of the magnet. 


Some of the magnets were just a smidge too big, so I had to do a little bit of trimming, but it wasn't a big deal.  It didn't take very long either.  :)

Next up, I put the magnets in the cards I had prepared for the magnets.  If you don't want an actual card, you could probably just mail the magnets by themselves (it would probably also save you in postage!).  I used photo corners to attach the magnets to the top, inside part of the cards.


I think they look fantastic!  I am so pleased with how they turned out.  I ordered envelopes from Amazon and they should be here on Tuesday.  I'm thinking of doing envelope liners for them, but I have to see how everything looks together first.  I'm also thinking about doing envelope seals, but that's not set in stone yet either.  We shall see!
Related Posts Plugin for WordPress, Blogger...